TYPICAL INSTRUMENT REPAIRS
our current repair price list
testimonials and repair examples
WOODWIND INSTRUMENT CHECKOVER
Clean dust from keywork, check all rods & screws tight, lubricate
keywork, check pads seating & regulate instrument. The instrument
is not dismantled for this.
Strip down, clean and polish body & keys, check condition of all
rods & screws & clean out old oil. Carefully inspect then re-seat
pads as required (up to two will be replaced) springs and corks will
be checked and replaced if needed. Instrument reassembled, lubricated,
regulated and tested.
Strip down, clean and polish body & keys, check all toneholes and
level if required, check condition of all rods & screws & clean
out old oil. Carefully re-place all pads with premium quality Italian
pads. Springs and corks will be checked and replaced if needed. Instrument
is then reassembled, lubricated, regulated and tested.
Instrument will be dismantled & cleaned inside & out minor dents
removed & slides checked true (Trombones), water key corks will
be inspected & changed as required, valve caps, springs & valves
will be checked, valves will be chemically cleaned, lapped in &
lubricated, slides will be inspected, cleaned, lapped & lubricated.
Guitar will be cleaned, polished & tuned, neck will then be checked
straight & truss rod adjusted as required, string height will be
set using by adjusting top nut & saddle, instrument will be tuned
again & relative tuning adjusted as required. If fitted tremolo
arm will be adjusted to give the correct intonation. If fitted all the
electrics will be checked & pot contacts cleaned. Finally instrument
will be re-tuned & tested to check there are no buzzes
We are professional members of the Music
Industries Association and are licensed to sell & fit the Musi-traC
instrument security microchip. Click on the links above to find
out more detail